User`s manual

Dismantle the control unit in reverse order if it is to be

used again directly by the wheelchair occupant. You can

decide which of the individual components [32 - 36] should

remain affixed to the wheelchair for use when the necessity

arises.

· Slide the control unit [1] into the offsetting component

[32] and secure it with the clamping lever [33].

· Insert the plug [5] into the control unit.

· Insert the assembled unit into the mounting [34].

· Finally, slide the angle mounting [35] onto the securing

feature [37] on the wheelchair.

· Secure the angle mounting [35] with the clamping lever

[36].

5 1 33 32 34 35 37 36