User`s manual

· Secure the tilt support in the holding device [a] with the

quick pins [b]. Press the locking mechanism in the center

of the locking pin and push the pin entirely into the

holding device.

· Check whether the quick pins [b] securely rest in the

holding device [a]. You are not supposed to be able to

remove them without pressing the locking mechanism in

their center.

· To remove the tilt support, work your way back step by

step.

Tilt Support

(available as optional accessory)

Since most wheelchairs come with tilt support, the

tilt support is available only as an optional accessory. If

we deliver the e·fix with tilt support, the latter is already

adjusted to your wheelchair.

· First remove the quick pins [b] from the holding device

[a] by pressing your thumb on the center of the pin while

lifting it out with your middle and index finger.

· Insert the tilt support [c] into the holding device [a].

(The tilt support for the left side is marked with an "L,"

for the right with an "R".)