User`s manual

· Withdraw the plug [5] from the control unit [1].

· Release the clamping lever [33] and slide the control unit

[1] out of the offsetting component [32].

a 5 32 1

4.5.2

Mounting the control unit on the swivel arm

· Slide the control unit [1] into the offsetting component

[32] and secure it with the clamping lever [33].

· Swivel the control unit to one side.

· Insert the plug [5] into the control unit [1].

The swivel arm can be attached to virtually

all wheelchair models. Contact your specialist

dealer or representative for further details.

4.5

Swivel arm (available as accessory)

To simplify driving to table edges, we recommend mounting

the optional swivel arm [12]. The swivel arm allows the

control unit to be swung out from its original position.

· Press the cap [a] and swing the control unit [1] out to

the side.

· To return, swing the control unit [1] back into the initial

position; the cap [a] moves upwards and automatically

locks the swivel mechanism.

· If the swivel arm and the control unit require removing

for e.g. transporting, they can be completely removed

from the mount [11]

· The control unit can be longitudinally offset a little more

if necessary in the offsetting component [32] itself by

releasing the clamping lever [33].

· After adjusting to the optimum position, secure by

tightening the clamping lever [33] on the offsetting

component [32].

4.5.1

Removing the control unit from the swivel arm

· Swivel the control unit to one side.