User`s manual

· If the symbol as well as Code 4 or 5 appear and a

continuous tone is heard, the wheels are not correctly

positioned in the wheel receivers.

Insert the wheels correctly in the wheel receivers on the

wheelchair (see Chapter 2.1)

· If the control unit is switched on but the e·fix is not

being used, it switches off automatically after 1 hour.

The switch-off period can be adjusted according to your

requirements by a specialist dealer for medical accessories.

(see Chapter 4.2.6).

Should the system check detect a system failure, this will

be indicated in the display and an acoustic signal is

simultaneously emitted. A list of all possible error messages

can be found in Chapter 9.1.

4.2.3

Adjustment wheel for selecting the speed

The speed which the e·fix should achieve when the joystick

is pushed as far as it will go, can be selected infinitely

variably at the adjustment wheel [30]. The adjustment range

is between 0.6 km/h and 6 km/h.

Wheelchair drivers who use the e·fix for the

first time, should begin at a low speed (see

also Chapter 6.2).

4.2.4

Horn

In order to signalize a dangerous situation, the horn can

be activated via the button [31].

· If the button [31] is pressed, a permanent acoustic signal

can be heard.

· If the button [31] is released, the signal stops.