User`s manual

4.2
Push buttons and displays
4.2.1
On/off switch
Use the button [8] to switch the e·fix on and/or off.
When switching on the e.fix, the electronic system auto-
matically checks the operability of all components. Varying
symbols simultaneously appear in the display which go off
when the check was fault-free.
8
4
2
30
31
32
4.2.2
Displays
After switching on the e·fix and on completion of the
automatic system check, various messages appear in the
display [2]:
· The bar display [4] shows the charging state of the
batteries.
Five black bars indicate that the "battery is charged 100%",
four black bars indicate that the "battery is charged 80%",
three black bars indicate that the "battery is charged 60%"
etc.
Make sure that the batteries are recharged in time so that
you can always get the most out of your e·fix. Please check
Chapter 3.2 for information on charging the batteries.
· The function Indoor/outdoor is permanently displayed by
the symbols "0" and/or "I" (see Chapter 4.2.5).
· The lighting of the display goes off 30 seconds after
switching on the e·fix, is reactivated however, in case
of a sudden error message.
· If the symbol and the Code 14 or 15 appear and an
intermittent tone is heard, the wheels are not engaged.
Engage the wheels (see Chapter 7.3)
16