User`s manual

An alternative method is to remove the control unit [1]
from the offsetting component [32] so that an accompanying
person can operate it from a bracket at the rear of the
wheelchair (see Chapter 10).
· Withdraw the plug [5] from the control unit.
· Release the clamping lever [33].
· Slide the control unit [1] out of the offsetting component
[32].
4.1.2
Installing the control unit
· Remove the plug of the control unit from the battery bag
[18] and insert it in the socket [6] on the control unit.
· Insert the connection pipe [7] together with the control
unit in the mount [13] on the wheelchair.
Proceed as follows if the control unit for the control system
has been removed from the offsetting component [32] by
an accompanying person:
· Slide the control unit [1] into the offsetting component
[32].
· Tighten the clamping lever [33].
· Insert the plug [5] into the control unit [1].
· Your e·fix is now ready for use again.
15