User`s manual

2.2

Removing the Wheels

If you want to transport the wheelchair, you can remove the

e·fix wheels and fold the wheelchair.

· Turn the coupling plate [15] of the left wheel counter clockwise

to position "I."

· Press the middle of the shutter [17] with your thumb, so that

the inserted bow-type handle [16] pops out.

· Pull out the bow-type handle [16] all the way.

· Lift the wheelchair up a bit and pull the wheel out of its

receiver.

· Insert the bow-type handle [16] back into the shutter [17].

· Repeat all to remove the e·fix wheel on the other side.

Please avoid damage at the stub axle [21] of the

wheels, particularly when transporting the

wheelchair.

· Repeat all these steps to mount the e·fix wheel on the

other side.

Before driving always make sure that both

wheels are properly locked (switch position

I). Faulty connec-tions show on the display

of the control unit (see chapter 9.1) and lead to an

immediate standstill of the system.

22 21 23 24