User manual

4.7 Swivel arm (available as accessory)

To simplify driving to table edges, we recommend mounting the optional swivel arm.

The swivel arm allows the control unit to be swung out from its original position.

· Press the cap [37] and swing the control unit [18] out to the side.

· To return, swing the control unit [18] back into the initial position; the cap [37]

moves upwards and automatically locks the swivel mechanism.

· If the swivel arm [36] and the control unit require removing for e.g. transporting, they

can be completely removed from the mount.

· The control unit can be longitudinally offset a little more if necessary in the sliding

piece [29] itself by releasing the clamping lever [30].

· After adjusting to the optimum position, secure by tightening the clamping lever [30]

on the sliding piece [29].

4.7.1 Removing the control unit from the swivel arm

· Swivel the control unit to one side (see chapter 4.7).

· Withdraw the plug [21] from the control unit [18].

· Release the clamping lever [30] and slide the control unit [18] out of the off sliding

piece [29].

4.7.2 Mounting the control unit on the swivel arm

· Slide the control unit [18] into the sliding piece [29] and secure it with the

clamping lever [30].

· Swivel the control unit to one side (see chapter 4.7).

· Insert the plug [21] into the control unit [18] (see chapter 4.3).

The swivel arm can be attached to virtually all wheelchair models. Contact your

dealer or Alber representative for further details.

BDA_E25_innen_GB_USA_final.indd 15 10.07.2008 12:07:00 Uhr