User manual

The belt xation must be conform to the scheme enclosed

with each belt delivery; the belt should be mounted and adjusted

by your regular dealer.

Please be careful that the belts don’t get caught in the spokes of

the rear wheel. The postural belts must not be used as safety belts

in a car.

• Anti-tipping castor wheels with foot rest (photo 24 and gure

25) :

This version includes a support for helping to tilt.

Adjust to the desired height (while respecting the recommended

distance) by operating the button (A gure 25).

The recommended distance between the castor wheels and

the oor is 3-5 centimeters, this adjustment is necessary in relation

to the rear wheel position and diameter.

Operate the button (A gure 25) and adjust the desired distance

using the preset adjustment holes.

Ensure that the stud is well positioned in the preset adjustment

hole to avoid any risk of falling.

Never forget to fold the anti-tipping castor wheels once they are

retracted.

5. Equipment

5.1. Motor Drive Unit (photo 26)

The electric drive unit of the Esprit Action

NG includes the

following components:

• 2 x 12" or 22/24" motorised wheels (A)

• electronic center (B)

• the battery packs (C)

5.2. Mounting Plate (photo 27)

The mounting plates to the right and left of the wheelchair frame

are equipped with two housings (A) for the rear wheel axle and (B)

for the electrical connection which allow tting of the 2 motorised

wheels.

3 cm mini

10 mm