User manual
10
11
!
This action should only be carried out by the attendant.
Always check that the backrest is correctly locked in order to
ensure complete user safety.
Check that the Velcro strips of the backrest cushion are well
positioned and have a good grip.
In order to avoid any risk of injury keep your ngers away from any
moving parts!
NOTE: To clean the Dartex cover, use a soft cloth soaked in
alcohol.
- Comfort Dartex head rest (photo 16) :
It is removable by completely loosening the button (A). The height
is adjustable by slightly loosening button (A), adjust to the desired
height and tighten gently (A).
The reclining angle, depth and height of the cushion are also
adjustable in by simultaneously operating lever (B) and the screws
(C).
NOTE: take care when positioning the indexable lever so that it
isn’t in the way or could cause injury for the user or the attendant.
!
Do not adjust the headrest while the user is leaning against
it and check its attachment the backrest to avoid any risk of injury.
4.2. Frame
4.2.1. Sides
The sides or lateral support are mainly designed for receiving the
castor and rear wheels.
These wheel supports allow three (3) height positions and two
longitudinal positions:
4.2.2. Folding system
380-605 mm Widths:
It consists of two double cross-braces which integrate the seat
rails.
To fold and unfold your wheelchair, see chapter A General
Information, paragraph 2.1.
305-380 mm Widths:
It is equipped with a telescopic cross-brace (gure 17) which
offers 4 seat width adjustments from 305 to 380 mm.
The seat and backrest covers are also width adjustable.
17
A
16
C
B