User manual
8
9
- Legrests Figure 8 & photo 9: follow the same procedure as for
the legrest hangers to retract and dismantle the legrest, operating
the trigger (A) to unlock the locking system.
Angle adjustment
Turn lever (B) with one hand while holding the legrest with the
other. Release the lever once you have reached the desired angle,
it will lock in one of the 7 positions (gure 8).
The calf cushion is retractable for transfers; its height is adjustable
by sliding after loosening the screw (C): adjust to the desired
height and rmly tighten up the screw (C). It is also adjustable
in depth: loosen the screw (D), change to the new position and
rmly tighten up the screw (D).
- Legrests (photos 10 & 11) : they are height adjustable and can
be equipped with a xed or articulated footplate (optional); the
footplate can be ipped-up for transfers. Loosen the screw (A) to
adjust to the desired height, rmly tighten up the screw after the
adjustment.
The footplate can be articulated by a toothed plate (optional),
loosen the screw (B), adjust to the desired angle and rmly
tighten up.
- Straps: to ensure a good position for the feet, two kinds of straps
are offered; the heel push strap positioned on the footplate, xed
or adjustable through Velcro strips and the calf strap afxed to the
legrest hanger and adjustable through Velcro strips.
NOTE: the standard legrest hangers and the legrests are xed by
pair on the chair; when dismantling, remember that there is a left
side and a right side!
!
Never lift the chair by the legrest hangers or the armrest! In
order to avoid any injury during folding, dismantling or adjusting
operations, keep your ngers away from any moving parts!
4.1.5. Multi-adjustable armrests (photos 12 & 13)
• To remove the armrest, simply pull it upwards, and do the
reverse to put it back in place, taking care that they are correctly
positioned.
• To adjust the height, slightly loosen the screw (A) and adjust to
the desired height using the preset adjustment holes. Firmly tighten
up.
8
C
D
A
B
9
A
B
10
11