User manual

8
9
4.1.3. Backrest ttings
- Backrests with standard cover:
If the padded backrest cover loosens, you should ask for a
replacement from your Distributor.
• Adjustable backrest tension (photo 6): it allows the adjustment of
the backrest curvature to the body shape and the position of the
user.
Lift the ap (A) and pull on one or both straps (B) and then
tighten or loosen them based on the version you have on your
chair. Each strap is adjustable independently of the others.
Reposition the ap (A).
!
Check that the Velcro strips are well positioned and holding.
Always carry out this adjustment before the user gets in the chair
to avoid any risk of injury!
4.1.4. Legrest hangers
- Standard hangers (photo 7) : they are retractable for transfers
and removable for transport.
Operate lever (A) by pushing sideways and rotate outwards or
inwards in the event of reduced space.
To return to the initial position, bring the legrest hanger back into
line, it will snap back into place automatically.
To remove the legrest hanger, simply pull upwards once you have
unlocked the system.
Carry out the operation in reverse to put it back into place
whilst keeping the unlocked position.
A
7
6
A
B