User`s manual

18
Mirroring (RAID 1)
Writes duplicate data on to a pair of drives while reads are performed in parallel. ATA RAID 1 is fault tolerant
because each drive of a mirrored pair is installed on separate IDE channels. If one of the mirrored drives
suffers a mechanical failure (e.g. spindle failure) or does not respond, the remaining drive will continue to
function. This is called
Fault Tolerance
. If one drive has a physical sector error, the mirrored drive will
continue to function.
RAID 1 (Mirroring)
On the next reboot, the FastBuild
TM
utility will display an error in the array and recommend to replace the
failed drive. Users may choose to continue using their PC, however Promise recommends replacing the
failed drive as soon as possible. See Chapter 4 for a functional description.
Due to redundancy, the drive capacity of the array is half the total drive capacity. For example, two 1GB
drives that have a combined capacity of 2GB would have 1GB of usable storage. With drives of different
capacities, there may be unused capacity on the larger drive.