User`s manual

12. Press [Enter] and confirm that the data will be copied on to the selected drive. All data on the

replacement drive will be written over with mirrored information from the array drive. A progress bar will

appear as below.

Please Wait While Duplicating The Image

10% Complete

13. Once the rebuild process is complete, the user will be asked to reboot the system.

Viewing Controller Settings

The Controller Configuration <6> menu selection allows you to enable or disable the MBFastTrak133 Lite

BIOS from halting (the default) if it detects an error on boot up. You may also view the system resources

(Interrupt and I/O port address) of FastTrak’s data channels.

[ Adapter Configuration - Options ]

Halt On Error: Enable

[ System Resources Configuration ]

Channel 1 (IDE1) Interrupt : A I/O Port : FFF0

Channel 2 (IDE2) Interrupt : A I/O Port : FFA8

[ Keys Available ]

[

←

→

, Space] Change Option [ESC] Exit

Halting FastTrak BIOS On Bootup Errors

The [Adapter Configuration – Options] section allows you to enable or disable MBFastTrak133 Lite to Halt

operation at the BIOS startup screen should an error be detected. This is the only option that can be

changed on this screen.

Viewing FastTrak System Resources

The [System Resources Configuration] section of this submenu displays the PCI slot interrupt and port

address used by the MBFastTrak133 Lite. The resources used are determined by the Mainboard PCI PnP

BIOS for the PCI slot in which the MBFastTrak133 Lite resides.

In the rare case that there is a resource conflict, refer to the Mainboard BIOS documentation on changes on

resources allocated to the MBFastTrak133 Lite PCI slot.