User`s manual

Problem 11:

No color on screen.

Causes:

1. Faulty Monitor.

2. CMOS incorrectly set up.

Solutions:

1. If possible, connect monitor to another system. If no color

replace monitor.

2. Call technical support.

Problem 12:

The screen shows “C: drive failure.”

Causes:

Hard drive cable not connected properly.

Solutions:

Check hard drive cable.

Problem 13:

Cannot boot system after installing second hard drive.

Causes:

1. Master/slave jumpers not set correctly.

2. Hard drives not compatible / different manufacturers.

Solutions:

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call drive

manufacturers for compatibility with other drives.