User`s manual

51
Power Supply (3.3V). While AC is not supplying power, the
motherboard uses the motherboard battery (3V). If AC power is
supplied and the Power Supply is not turned on, 5VSB from the
Power Supply is used. When the Power Supply is eventually
turned on 3.3V from the Power Supply will be used.
There are 2 options: “On”, “Off”.
“
Off” (default) Means always set CMOS to the “Off”
status when AC power is lost.
“
On” Means always set CMOS to the “On”
status when AC power is lost
PS2KB Wake up Select
There are 2 options: Hot Key, Password.
“Password” When select Password, please press
ENTER key to change Password MAX 8
numbers.
“Hot Key” Use PS2KB devices to awaken the system
from S1-S5 Mode.
PS2KB Wake up from S1-S5
You can use PS2KB devices to awaken the system from S1 Mode,
S2 Mode, S3 Mode (Suspend to RAM), S4 Mode (Suspend to
Disk) and S5 Mode (Shutdown).
USB Wake up
This item allows you to select USB devices to awaken the
system from suspend mode.
The Choices: Disabled (default), Enabled.
VGA
When set to On, any event occurring at a VGA Port will awaken
a system which has been powered down.
The Choices: OFF (default), On.
LPT & COM