User`s manual

17
4.11 Sophisticated OTP (Over Temperature
Protection) function: JP4
This motherboard supports another special design for CPU Over
Temperature Protection. If this function is set to “Enabled” and
the CPU temperature is over normal range, the system will
automatically shut down and you have to plug out and re-install
your CPU heat sink, then restart your system. This means that if
you don’t plug out, you will not be able to power on your system
again.
4.12 Case Open Warning function: CASE
OPEN
If this function is set to “Enabled” in BIOS and the case is
opened by others, the system will automatically show alert
messages on the screen display when you power on your
computer. On the contrary, if this function is set to “Disabled” in
BIOS, the system will not show alert messages when you power
on your computer even if the case is opened by others.
Case Open Assignment
1 Caseop-
2 Ground
JP4 OTP
1-2 Disabled (Default)
2-3 Enabled
“Disabled” is the default in this function.