User`s manual

16
CPU’s default frequency and POST again. With this special
feature, you can easily overclock your system to get higher
system performance without removing the cover of system
housing, and be able to set the jumper to clear CMOS data
when your system hanged.
4.9 Clear CMOS Jumper: JP1
JP1 Assignment
1 3
1-2 Closed
Normal (default)
1 3
2-3 Closed
Clear CMOS Data
1. Turn off your system and remove AC power line.
2. Set JP1 to OFF (2-3 Closed).
3. Wait several seconds.
4. Set JP1 to ON (1-2 closed).
5. Connect the AC power line and turn on your system.
6. Reset your desired password or clear CMOS data.
4.10 CPU Frequency Selection: JP2
JP2 CPU Frequency
1-2 100.0MHz
2-3 133.0MHz
3-4 166.0MHz
The following procedures are for resetting
the BIOS password. It is important to
follow these instructions closely.