User`s manual

Mainboard KM51PV-754
8
2. Align a memory on the socket such that the notch on the memory matches the break on the
socket.
3. Lower the memory vertically into the socket and press firmly by using both thumbs until the
memory snaps into place.
4. Repeat steps 1, 2 & 3 for the remaining memory and DIMM sockets setup.
Back Panel Configuration
PS/2 Mouse & PS/2 Keyboard Ports: KB/MS
This mainboard provides a standard PS/2 mouse port and a PS/2 keyboard port. The pin
assignments are described below.
Pin Assignment Pin Assignment
1
Data
4
+5 V (fused)
2
N/A
5
Clock
3
Ground
6
N/A
PS/2 Mouse
PS/2 Keyboard
* The pictures shown above are for reference only. The actual
installation may vary depending on models.
Downloaded from www.Manualslib.com manuals search engine