User`s manual

Mainboard KM51PV-754
FAN Headers: CPUFAN, AUXFAN, CHASFAN
There are three fan headers available for cooling fans. The cooling fans play an important role
in maintaining ambient temperatures in your system. The CPUFAN header is attached with a
CPU cooling fan. The CHASFAN and AUXFAN headers are attached with other cooling fans.
Pin Assignment
1 Ground
2 Power (+12V)
1
CPUFAN/ AUXFAN/
CHASFAN
3 FAN RPM rate sense
On most fan power cord, the black wire of the fan cable is the “ground”
and should be attached to pin-1 of the header.
Attention
You can avoid damaging your CPU due to high temperatures with
proper cooling equipment. It is recommended that attach a cooling fan
on top of your CPU. Use the CPUFAN header to attach the fan cord.
Memory Installation: DIMM1/2
The KM51PV-754 provides two DIMM (Dual In-Line Memory Modules) sockets. It allows you to
install 184-pin, non-ECC, and unbuffered DDR400(PC3200)/ DDR333(2700)/ DDR266(PC2100)
SDRAMs, and supports to install a total memory capacity of 2GB.
Memory Setup Steps:
The following instructions explain how to set memories onto the DIMM sockets for this
mainboard.
1. Pull the white plastic tabs at both ends of the socket away.
7
Downloaded from www.Manualslib.com manuals search engine