Technical data

13 Manual #001451 Version 4.2
Electrical Malfunctions
For repair of electrical malfunctions see the error code manual at the appendix of the user manual
instructions.
Malfunction Possible Causes Necessary Measures
Power supply is off Check power supply and fuse
Main switch off
Turn (main switch) switch on
Up impulse permanently activated Test impulse actuator
Photocell interrupted or disconnected Test safety devices
Check adjusted control function
Stop-circuit interrupted
Door does not close
Door closes only
with next impulse
Toggle circuit adjusted
Check control unit and replace the fuse
Safety device damaged
Check stop circuit. Unused stop inputs
must be bridged in accordance with the
circuit diagram.
Door not functioning
Warranty
The door is warranted against defects in material and workmanship for a period of two-years from
the date of installation. The door’s counterbalance springs are warranted for a period of two years
or 200,000 cycles from the date of installation, whichever occurs first.
Maintenance
Customer Service
In the event maintenance or repair is required, please contact the supplier or the
manufacturer of the door.
Albany Door Systems
1080 Maritime Drive
Port Washington, WI 53074
Main Telephone: [phone]
Customer Service Telephone: [phone]
Customer Service Fax: [phone]