Technical data

11 Manual #001451 Version 4.2
General Safety Advice
Please read the user manual carefully and keep it easily accessible for future use.
Always follow the safety instructions mentioned in the user manual.
Do not use this door for purposes it is not intended for. This user manual must also be trans-
ferred upon the transfer of this door to third parties.
The use of the emergency lever may lead to a partial self-opening or closing of the door.
The door panel may be opened upon failure of the electrical drive by disconnecting the brake us-
ing the emergency disconnect lever.
Do not put your hands on the side frames of the door during operation.
Lingering of persons in the working area of the door should be avoided. Existing man doors
should be used for pedestrian traffic.
Should it be necessary for pedestrians to utilize the door opening, they should walk through at a
normal pace.
Keep the immediate area of the door free of debris or refuse, which could cause accidents.
Do not climb on the door.
The power to the door must be shut off at the main switch and must be secured against returning
to the ―on‖ position prior to working on the door.
Upon damage to the door (mechanical or electrical), the power must immediately be turned off.
This is especially valid when damage has occurred to the electrical cables or wiring.
The door must only be operated within the parameters of the defined voltage or net frequency.
Use only equipment or additional features which are authorized by the manufacturer of the door.
Operating the door during excessive wind pressures may be dangerous.
Safety instructions must be observed without exception, not only the general safety instructions but
also the special notices mentioned in other chapters of the manual
Additional Advise
Please call 800-252-2691 for further information about this product or about Albany Door Systems’
complete product line.