Owner`s manual

Periodic Maintenance Continued…

Quarterly Inspection

1. Perform daily inspection.

2. Check all mounting hardware and verify that all nuts and bolts are tight. Hardware includes: wall anchors, cover hardware, mo-

tor mounting hardware, and bearing bolt nuts.

3. Check the break away function by performing the following steps:

 Stop the door so the bottom rail is between waist and chest high.

 Push the bottom bar out of one of the side columns.

 Press the open key pad and verify that the door opens to the break away opening height and that the bottom bar centers

in the side rails.

 Press the close key pad and verify that the bottom rail is centered and the door closes fully.

4. Inspect all side and top weather seals for wear or damage.