Owner`s manual

350016-0000 7 Version 4/22/2010
PACKING LIST
Before beginning the installation, thoroughly inspect the crate to ensure all necessary
components are there. The following list applies to a standard Model 355 door
(No optional parts are included unless ordered that way).
Left Hand and Right Hand Side Columns with attached Covers (1 set)
Top Roll Assembly (1)
Drive Unit w/torque arrestor bracket (1)
Electrical Control Panel (1)
Safety Photocells (1 set)1
Bottom Rail Profile (1)
Counterbalance Springs (2)
Tensioning Ropes (2)
Width Gauge
Assembly Hardware
OPTIONAL PARTS
Motion Detector
Floor Loop
Transmitters
Auxiliary Pushbuttons Stations
Pull Cords
SUGGESTED TOOLS REQUIRED
5mm allen wrench
Water Level
6mm allen wrench
Carpenters Level
8mm allen wrench
Hammer
18mm open end wrench
Wrench set (SAE)
Screwdriver
Screwdriver Set
Tape Measure
Come-a-along
Wrench set (METRIC)
Drill bits