Specifications

12
The Setup Menu
Time Settings
Timer Mode: When set to AUTO the system’s time
settings will be obtained from the transmission
signal. To set manually use the / buttons to
select MANUAL.
1. Scroll down to the DATE setting using the /
buttons. Press the / buttons to activate the
calendar screen, where you use a combination of
the / / / buttons to navigate the calendar
until you nd the correct date. Press the ENTER
button to store the date.
2. After scrolling down to the TIME setting use the
/ buttons to select the digit you wish to
change. Press the relevant numeric key for the
number you wish to enter. Press either /
buttons to store the setting.
3. GMT OFFSET is only available when the TIMER
MODE is set to AUTO. Use the / / /
buttons to set your GMT offset zone. Leaving
on AUTO sets the zone depending on the
transmission.
4. The SUMMER TIME setting is only available
when the GMT OFFSET option is set to anything
but AUTO. Use the / buttons to cycle
between ON & OFF.
Wake Up Timer Settings
The wake up timer allows you to set a reminder
when a program is about to start, or for timer
recording to a PVR or VCR device.
• Timer NO: This allows you to set up to 8 wake
up timers.
• Timer Mode: Set to OFF, ONCE, DAILY,
WE EKLY or YEAR LY.
• Wakeup Mode: Select from OFF, MESSAGE,
Conguration Conguration
CHANNEL or ON.
• Wakeup Channel: Select the channel you wish
to view.
• Wakeup Date: Use the displayed calendar to
select the date for the wake up operation.
• On Time: Sets the time the wake up operation
will start.
• Duration: Sets the duration the wake up
operation stays active for.
Example 1: You are watching a program on BBC1,
but wish to view a program later on BBC2 at
2.30pm which runs for 30 mins.
1. The settings would be as follows:
Timer No 1
TImer Mode Once
Wakeup Mode Channel
Wakeup Channel BBC2
Wakeup Date 11.04.2010
On Time 14:30
Duration 00:30
2. Press the EXIT button a number of times to
return to the TV and save the setting you just set.
You can now continue to watch the TV.
3. When the timer reaches the programmed time
the set top box will change to the chosen channel
and display it for the selected duration.
4. When the 30 minutes duration comes to an end
the set top box will revert back to the channel you
where watching prior to the wake up operation.
Example 2: You wish to make a recording of a