System information

2 Software installation from the startup OS
2.1 Overview of installing sof
tware from the startup OS
While the startup OS is running, the IP address of the management port is set to 192.168.0.1/24. To
perform a software installation from the startup OS (hereafter an installation), you must first transfer
the update file from a remote terminal, such as a PC, by using the management port (see 1) below).
After that, you must execute the update command (ppupdate, see 2) below).
PC
Switch
IPv4 network
1) Transfer the update file (ftp).
2) Log in to the Switch, and then execute the
update command (ppupdate).
Management port
192.168.0.1/24
6