System information

1 Overview
1.1 Overview of updating and installing software
There a
re two ways to set up the software: (1) Perform a software installation from the startup OS,
or (2) perform a software update. Each way has a different purpose and procedure. Select whichever
is more suitable for your situation based on the following figure.
When the flash memory contains the startup OS
#1
(1) Installation from the startup
OS (Chapter 2)
When the basic software is already
installed in the flash memory
(2) Software update (Chapter 3)
#1: After you log in to the Switch, if the command prompt is BOOT-INST-OS>, it
indicates that the startup OS is running.
4