System information

Example
# show logging standby
Date 20XX/09/19 22:37:41 UTC
System information
AX6304S, OS-SE Ver. 10.2.A (Build:162), MSU2(standby) (Check the displayed information.)
Logging information
EVT 09/19 22:35:01 E3 MSU 01300413 2314:0e8000000000 System status changed from
simplex to duplex.
:
:
10) Ensure that the capacity required to transfer the update file to the BCU, CSU, or MSU module
in the active system is available. Execute the rm /usr/var/update/k.img command to
delete the k.img file in the active system.
Example
# rm /usr/var/update/k.img (Execute the rm /usr/var/update/k.img command.)
remove '/usr/var/update/k.img'? y (Enter y.)
#
11) Perform a system switchover of the BCU, CSU, or MSU module for the AX6700S, AX6600S,
or AX6300S series switch, respectively. Execute the redundancy force-switchover
command. Replaces the active system with the standby system in a redundant configuration.
Example
# redundancy force-switchover (Execute the redundancy force-switchover command.)
SBY:# (The command prompt changes to SBY:#.)
12) After the active and standby systems are switched over, log in to the new active system, using
the user-specified ID (for example, operator).
13) Execute the enable command. The command prompt changes to #.
Example
:
login: operator (Log in as operator.)
Copyright (c) 20XX ALAXALA Networks Corporation. All rights reserved.
> enable (Execute the en
able command.)
# (The command prompt changes to #.)
14) Execute the ls -l /usr/var/update/ command, and confirm that the size of the
k.img file is the same as the source file transferred to the Switch.
15) Enter the cd /usr/var/update command to change the directory.
20