System information

8) Exec
ute the show system command to confirm that the status of the standby system is
standby or software version discord. If any configuration items are not supported,
for example, due to the downgraded version, configuration discord or both
configuration discord and software version discord are displayed for the
status of the standby system.
If the status of the standby system is standby or software version discord, go
to step 9). If the status is configuration discord or both configuration discord
and software version discord, go to step 19).
Example
# show system
Date 20XX/09/19 22:37:24 UTC
System: AX6304S, OS-SE Ver. 10.2
Node : Name=
Contact=
Locate=
Elapsed time : 00:06:30
Machine ID : 0012.e220.5300
Device redundancy cpu status : duplex
Power control : normal
Power redundancy-mode : check is not executed
PS1 = active
PS2 = active
PS3 = active
PS4 = active
Fan : active No = FAN1(1), FAN1(2), FAN1(3),
FAN2(4), FAN2(5), FAN2(6)
Speed=normal
MSU1 : active
CPU : AX-F6300-51A [MSU-1A , 80200020]
Boot : 20XX/09/19 22:31:05 , power on , 0 times restart
PSP : active
Lamp : STATUS LED=green , ACTIVE LED=green , SYSTEM1 LED=green
System operation panel : No error
Board : CPU=PowerPC 667MHz , Memory=1,048,576kB(1024MB)
Management port: unused
Temperature : normal(24degree)
Flash :
user area config area dump area area total
used 21,135kB 15kB 0kB 21,150kB
free 72,146kB 19,029kB 20,678kB 111,853kB
total 93,281kB 19,044kB 20,678kB 133,003kB
MC : notconnect
MSU2 : software version discord (The status of the standby
system is displayed.)
CPU : AX-F6300-51A [MSU-1A , 80200020]
:
:
9) Execute the show logging standby command to make sure that the updated software is
running.
19