System information
2.5 Installation procedure
Fo
llow the procedure shown below to install the software:
1) After the Switch is turned on, wait until login: is displayed.
2) After login: is displayed, log in with the user name operator.
After you log in to the Switch, BOOT-INST-OS> is displayed for the prompt, indicating
that the startup OS is running. After logging in, if BOOT-INST-OS> is not displayed, the
basic software is running. In this case, perform an update according to 3 Software update.
3) Enter the enable command.
The command prompt changes to
BOOT-INST-OS#.
Example
:
Loading from dev0 100%
login: operator (Log in as operator.)
Copyright (c) 20XX ALAXALA Networks Corporation. All rights
reserved.
Please install product software.
BOOT-INST-OS> enable (Execute the e
nable command.)
BOOT-INST-OS# (The prompt changes to BOO
T-INST-OS#.)
4) See the procedure for transferring files described in Appendix to transfer an update file to the
/usr/var/update directory in the Switch.
(This operation must be performed in binary mode.
)
5) Execute the ls -l /usr/var/update/ command, and confirm that the size of the
k.img file is the same as the source file.
6) Enter the cd /usr/var/update command to change the directory.
Example
BOOT-INST-OS# ls -l /usr/var/update
total 18994
-rwxrwxrwx 1 XXXXXXXX Sep 15 21:45 k.img root wheel (Check the file size.)
BOOT-INST-OS# cd /usr/var/update (Change the directory.)
10