Instruction manual

1. Components Overview
34
unit.
The XFP transceivers supported by the Switch are listed in Table 1-17 List of XFP
transceivers.
Table 1-17 List of XFP transceivers
Number Module name Interface
1 XFP-SR 10 Gigabit Ethernet 10GBASE-SR
2 XFP-LR 10 Gigabit Ethernet 10GBASE-LR
3 XFP-ER 10 Gigabit Ethernet 10GBASE-ER
4 XFP-ZR 10 Gigabit Ethernet 10GBASE-ZR
The Switch uses laser beams that are colorless and transparent, and
invisible to the eye. Never look directly into the optical transceiver.
CAUTION
Do not attach any labels to a transceiver.
A label attached to the transceiver indicates that the transceiver is a
standard product from ALAXALA or another manufacturer.
However, such labels are attached where they do not interfere with
heat dissipation from the transceiver or the mechanism that prevents
the transceiver from coming loose from the cage.
Attaching a label to a location that interferes with these functions could
cause a malfunction in the transceiver or damage to the Switch.
NOTE
Make sure that you use standard ALAXALA products labeled as
shown in the figures. If non-standard products are used, correct
operation is not guaranteed.
(1) XFP-SR
Figure 1-33 External appearance
(1) Label: ALAXALA XFP-SR
(2) Lever color: Ivory