Instruction manual

1. Components Overview

1.7 Memory card (MC)

To use a memory card, install it in a basic control unit.

The memory card is used for the following:

z Backing up operating information

z Saving troubleshooting information in the event of a failure

z Updating the Switch software

(1) SD128

This memory card is an SD memory card with a capacity of 128 MB.

Figure 1-23 External appearance

Label: ALAXALA SD128

NOTE

Make sure that you use standard ALAXALA memory cards labeled as

shown in the figure. If non-standard products are used, correct

operation is not guaranteed.

NOTE

The memory card can be written to approximately ten thousand times.