Instruction manual

4. Installing a Switch
86
4.6.2 Connecting and disconnecting the AC power cable
(1) Connecting the AC power cable
NOTE
The figure below shows an example of connecting the 100 V AC
power cable supplied with a Switch. Use the same procedure to
connect a 200 V AC power cable.
Step 1
Connect a power cable to the power connector.
Figure 4-10 Connecting the power cable
(1) Power cable
When using a Switch at 100 V AC, always use a grounded power
outlet. Using the Switch without grounding could result in electric
shock or failures due to electrical noise.
When using a Switch at 100 V AC, use the supplied power cable.
Using another cable could result in fire or electric shock. In addition,
do not use the supplied power cable with another switch. Doing so
could result in fire or electric shock.
When using the Switch at 200 V AC, you must use a grounded power
outlet, and make sure that the power outlet is grounded to the
grounding board of the building.
To do this, ask maintenance personnel or a professional electrician.
Using the Switch without grounding could result in electric shock or
failure due to electrical noise.