Instruction manual

4. Installing a Switch
80
4.5 Mounting in a rack
The Switch can be mounted in to a 19-inch cabinet rack that conforms to the EIA
standard.
The procedure for mounting in a rack is described below.
It is not possible for the provided rack fixture alone to support the
weight of a Switch. Its purpose is merely to hold a Switch on the rack.
Use the guide rails or shelves. You must use the guide rails and
shelves provided with the rack, and these must be able to support the
weight of a Switch (with the maximum number of optional modules
installed).
NOTE
Use a rack facility that satisfies the conditions described in
2.8
Installation location
(2) 19-inch cabinet rack.
4.5.1 AX6708S
Step 1
Attach a guide rail or a shelf to the rack.
For the installation location of the guide rail, see Figure 4-5 Installation location of
the guide rail.
Figure 4-4 Installing a guide rail
(1) Guide rail