Instruction manual

4. Installing a Switch
77
4.3 Installing a Switch on a desktop
A Switch can be placed on a stable, flat surface.
Rubber pads are attached to the bottom of the Switch when it is shipped from the
factory. When installing a Switch on a desktop, do so without removing the rubber
pads.
When installing the Switch, hold it by the bottom and the handles.
Figure 4-1 Installing a Switch on a desktop
(1) Handles
When installing the Switch on a table, position the Switch horizontally
on a worktable strong enough to bear the weight of the Switch. Placing
the Switch in an unstable location, such as on an unsteady or tilting
surface, might cause the Switch to fall, resulting in injury.
The maximum weight of the AX6708S is 82 kg. The AX6708S must be
placed and carried by trained persons or by a professional carrier. If a
person other than the above does these operations, the AX6708S might
fall, resulting in injury.
When placing and carrying the AX6708S, use a handling device such
as a hand lifter. If you carry the AX6708S without using a handling
device, the AX6708S might fall, resulting in injury.
When moving a Switch, do not hold the handle of the fan unit or power
supply unit. The handle might come off, resulting in the Switch falling
and possibly causing injury. Also, the fan unit or power supply unit
might become deformed, resulting in fire or electric shock.