Instruction manual

4. Installing a Switch

(3) Guide rail

The maximum weight of the AX6604S is 45 kg. The Switch must be

installed and carried by at least three people. Installing or carrying a

Switch with too few people could result in the Switch being dropped or

falling, possibly leading to injury.

When moving a Switch, do not hold the handle of the fan unit or power

supply unit. The handle might come off, resulting in the Switch falling

and possibly causing injury. Also, the fan unit or power supply unit

might become deformed, resulting in fire or electric shock.

NOTE

To install a Switch in an elevated location, ALAXALA Networks

Corporation recommend that you use a hand lifter or equivalent

device.

Step 3

Secure the Switch to the rack.

Figure 4-9 Mounting a Switch on the rack

(1) Screws (M5 or M6 x 4)

NOTE

To secure a Switch to the rack, use the M5 or M6 screws supplied with

the rack.

4.5.2 AX6604S (when support brackets are used)

The support bracket supports the AX6604S only. Do not use the

bracket with another Switch. Using a bracket with another Switch

might cause the Switch to drop or fall, resulting in injury.

When support brackets are used to mount a Switch on a rack, the

weight of the Switch is borne by the rack fixture and the support

brackets only. Securely tighten the screws on the rack fixtures and the

support brackets.