Instruction manual

MA-2 AX66S-H001X
9
Port Transceiver Interface Cable Connector
Multiple-terminal mode fiber optic cable
(core/cladding diameter = 50 μm/125 μm)
XFP-SR 10GBASE-SR
Multiple-terminal mode fiber optic cable
(core/cladding diameter = 62.5 μm/125 μm)
XFP-LR 10GBASE-LR
XFP-ER 10GBASE-ER
10GBASE-R port
XFP-ZR 10GBASE-ZR
Single-terminal mode fiber optic cable
(core/cladding diameter = 10 μm/125 μm)
LC duplex
connector
AUX port
--
RS-232C
RS-232C straight-through cable D-SUB 9-pin
connector
CONSOLE port
--
RS-232C
RS-232C crossover cable D-SUB 9-pin
connector
10BASE-T UTP cable (Category 3 or higher) MANAGEMENT
port
--
100BASE-TX
UTP cable (Category 5 or higher)
RJ-45
connector
#1: Some kinds of multiple-terminal mode fiber optics might increase the BER (bit error rate) when used with
1000Baase-LX. In this case, proper communication can be established by using the mode-conditioning patch
code.
3.2 Details about interface cables
3.2.1 UTP cables (10/100/1000BASE-T)
The SFP-T transceiver's physical specifications have been added as Table 3-2a.
Addition:
Table 3-2a 10/100/1000BASE-T physical specifications (SFP-T transceiver)
Physical specifications
Item
10BASE-T 100BASE-TX 1000BASE-T
Category Category 5 and higher Category 5 and higher Enhanced category 5 and higher
Transmission distance (max.) 100 m 100 m 100 m