Instruction manual

1. Components Overview
30
NOTE
If no system recovery is set and a failure occurs in a Switch, the
Switch can stay stopped without recovering the failed part.
This function is supported by software version 10.3 and later.
(4) NH1GS-6M
The NH1GS-6M is a network interface unit with the following hardware
specifications:
z Ethernet port (10/100/1000BASE-T): 4 ports
z Ethernet port (1000BASE-X): 2 ports
NOTE
For information about the SFP transceivers supported by the Switch,
see 1.7.1 SFP.
 Front view
The front view is shown below.
For information about LEDs, see Table 1-16 LED indications.
Figure 1-27
Front view
(1) STATUS LED
(2) LINK/TR LED
(3) SEL LED
(4) Ethernet port (10/100/1000BASE-T)
(5) Ethernet port (1000BASE-X)