Instruction manual

5. Adding and Replacing Optional Modules
169
the
Activate operation).
4. Match the software version used in the standby system with the version used
in the active system (use the
ppupdate command).
5. Synchronize the configuration, user account, password, and license key
settings of the standby system with the settings of the active system (use the
synchronize command).
6. When an optional license has been installed, restart the management and
switching unit of the standby system in order to reflect the license key
information (use the
reload command).
NOTE
For details about the Activate and Inactivate operations, see 11 Switch
Management in the Software Manual Configuration Guide Vol. 1.
NOTE
For details about the commands to use, see the following manuals:
restore command: 9. Checking the Software Version and Switch
Status in the Software Manual Operation Command Reference Vol. 1
ppupdate command: 13. Software update in the Software Manual
Operation Command Reference Vol. 1
synchronize command: 29. Making Devices Redundant in the
Software Manual Operation Command Reference Vol. 1
reload command: 9. Checking the Software Version and Switch
Status in the Software Manual Operation Command Reference Vol. 1