Instruction manual

4. Installing a Switch

4.5 Mounting in a rack

The Switch can be mounted in to a 19-inch cabinet rack that conforms to the EIA

standard.

The procedure for mounting in a rack is described below.

It is not possible for the provided rack fixture alone to support the

weight of a Switch. Its purpose is merely to hold a Switch on the rack.

Accordingly, use the following fixtures:

z AX6304S: Guide rails, shelves, and support brackets

z AX6308S: Guide rails and shelves

You must use the guide rails and shelves provided with the rack, and

these must be able to support the weight of a Switch (with the

maximum number of optional modules installed).

NOTE

Use a rack facility that satisfies the conditions described in (2) 19-inch

cabinet rack in 2.8 Installation location.

4.5.1 AX6304S (when a guide rail or a shelf is used)

Step 1

Attach a guide rail or a shelf to the rack.

For the installation location of the guide rail, see Figure 4-7 Installation location of

the guide rail.

Figure 4-6

Inst

alling a guide rail

(1) Guide rail