Instruction manual

MA-2 AX63S-H001-50X

Port Transceiver Interface Cable Connector

Multiple-terminal mode fiber optic cable

(core/cladding diameter = 62.5 μm/125 μm)

XFP-LR 10GBASE-LR

XFP-ER 10GBASE-ER

XFP-ZR 10GBASE-ZR

Single-terminal mode fiber optic cable

(core/cladding diameter = 10 μm/125 μm)

AUX port

-- RS-232C RS-232C straight-through cable D-SUB

9-pin

connector

CONSOLE port -- RS-232C RS-232C crossover cable D-SUB

9-pin

connector

10BASE-T UTP cable (Category 3 or higher) MANAGEMENT

port

100BASE-TX UTP cable (Category 5 or higher)

RJ-45

connector

#1: Some kinds of multiple-terminal mode fiber optics might increase the BER (bit error rate) when used with

1000Baase-LX. In this case, proper communication can be established by using the mode-conditioning patch

code.

#2: In the MSU-1A and MSU-1B, the AUX port is supported by software version 10.3 and later.

3.2 Details about interface cables

3.2.1 UTP cables (10/100/1000BASE-T)

The SFP-T transceiver's physical specifications have been added as Table 3-2a.

Addition:

Table 3-2a 10/100/1000BASE-T physical specifications (SFP-T transceiver)

Physical specifications

Item

10BASE-T

100BASE-TX 1000BASE-T

Category Category 5 and higher Category 5 and higher Enhanced category 5 and higher

Transmission distance (max.) 100 m 100 m 100 m