Troubleshooting guide

History of Amendments
[Edition 14]
Summary of amendments
[Edition 13]
Summary of amendments
[Edition 12]
Summary of amendments
[Edition 11]
Summary of amendments
Item Changes
Failure analysis for the AX3800S, AX3600S, and
AX2400S series
• A description of AX3830S-44X4QW was added.
Loop connector specifications • A description of 40GBASE-SR4 loop connector specifications
was added.
Item Changes
Returning to administrator mode from configuration
command mode is not possible
• This subsection was added.
Stack configuration problems • This subsection was added.
Communication failures in filters and QoS
configurations
• Descriptions of policy-based routing and policy-based
switching were added.
Policy-based routing problems • This subsection was added.
Policy-based switching problems • This subsection was added.
Action to be taken when a MAC address table resource
shortage occurs
• A description of policy-based switching was added to Table
4-3 How to delete MAC address table entries.
Obtaining failure information • A description of stacks was added.
Item Changes
Failure analysis for the AX3800S, AX3600S, and
AX2400S series
• A description of AX3800S series switches was added.
Communication is not possible in IPv4 PIM-DM
networks
• This subsection was added.
Multicast data is forwarded twice in an IPv4 PIM-DM
network
• This subsection was added.
Item Changes
Failure analysis for the AX3600S and AX2400S series • A description of AX3600 and AX2400S series switches was
added.
Failures occurring when the Ring Protocol
functionality is used
• A description of the multi-fault monitoring functionality was
added.
Communication is not possible or is disconnected • The description was changed in accordance with the addition
of VRF support in AX3600S and AX2400 series switches.