Troubleshooting guide

5. Obtaining Failure Information
189
5. Specify the destination directory.
6. Specify a file name.
(3) Use the "remote command" command to use the "show tech-support" command to
collect information (at the time of stack configuration)remote command
Figure 5-9: Collection of member switch (switch number 2) maintenance information by the
master switch (at the time of stack configuration)
> remote command 2 show tech-support > support.txt <---1
Executing.
...............................................................................
...........
...............................................................................
........................................................
Operation normal end.
>
1. Execute the command.