Technical information

AX Series L2 Loop Detection Configuration Guide (Edition 2)

Configuring E1

Configuring an SNMP trap destination

(config)# snmp-server host 192.168.100.200 traps

"public" loop-detection

Set the host address and community name of the

SNMP manager to which traps related to the L2 loop

detection functionality are issued.

Configuring a device IP

(config)# interface vlan 10

(config-if)# ip 192.168.10.1 255.255.255.0

Set an IP address to one of the VLANs connected to

uplink ports in order to issue traps related to the L2

loop detection functionality.

Configuring a default gateway

(config)# ip default-gateway 192.168.10.254

Set the default gateway to enable communication

externally.