Technical information

AX Series L2 Loop Detection Configuration Guide (Edition 2)
Copyright © 2008, 2010, ALAXALA Networks Corporation. All rights reserved.
11
Table 1.5-2 Configurations related to storm control (AX3600S/2400S/1200S series)
Parameter Description
Configured in interface configuration mode (config-if)
storm-control broadcast level pps
Enables storm control for broadcast frames and sets the
threshold value for the receiver bandwidth for storm control.
Frames exceeding the threshold are discarded.
storm-control multicast level pps
Enables storm control for multicast frames and sets the
threshold value for the receiver bandwidth for storm control.
Frames exceeding the threshold are discarded.
storm-control unicast level pps
Enables storm control for flooded unicast frames and sets
the threshold value for the receiver bandwidth for storm
control. Frames exceeding the threshold are discarded.
storm-control action inactivate
Blocks the port when a storm is detected.
storm-control action trap
Issues an SNMP trap when a storm is detected and when a
storm ends.
storm-control action log
Outputs a log message when a storm is detected and when
a storm ends.