Specifications

ALAXALA Ring Configuration Guide (Edition 1)
Copyright © 2008, ALAXALA Networks Corporation. All rights reserved.
41
Settings of AC2 (backbone ring/building A's shared node and the backbone ring master)
(config)# axrp vlan-mapping 1 vlan 50-99,1000
Adds VLAN50 through VLAN99 to vlan-mapping 1 for the ring.
(Important points on constructing a system (3)
)
Configuring the rings
(config)# axrp 5
(config-axrp)# mode transit ring-attribute
rift-ring-edge 2
(config-axrp)# control-vlan 5
(config-axrp)# vlan-group 1 vlan-mapping 1
(config-axrp)# health-check interval 500
(config)# axrp 10
(config-axrp)# mode master
(config-axrp)# control-vlan 10
(config-axrp)# vlan-group 1 vlan-mapping 1
(config-axrp)# health-check interval 10
(config-axrp)# health-check holdtime 32
(config)# axrp 11
(config-axrp)# mode transit ring-attribute
rift-ring-edge 2
(config-axrp)# control-vlan 11
(config-axrp)# vlan-group 1 vlan-mapping 1
(config-axrp)# health-check interval 500
Starts the configuration of the ring with RING ID 5 (Ring 5).
Specifies the node as a transit and shared node for the shared link
non-monitoring ring.
Specifies VLAN5 as the control VLAN.
Assigns vlan-mapping 1 to vlan-group 1.
(Important points on constructing a system (3))
Sets the HC sending interval to 500 ms.
Starts the configuration of the ring with RING ID 10 (Ring 10).
Specifies the node as the master node for the shared link
monitoring ring.
Specifies VLAN10 as the control VLAN.
Assigns vlan-mapping 1 to vlan-group 1.
(Important points on constructing a system (3))
Sets the HC sending interval to 10 ms.
Sets the HC hold time to 32 ms.
Starts the configuration of the ring with RING ID 11 (Ring 11).
Specifies the node as a transit and shared node for the shared link
non-monitoring ring.
Specifies VLAN11 as the control VLAN.
Assigns vlan-mapping 1 to vlan-group 1.
(Important points on constructing a system (3)
)
Sets the HC sending interval to 500 ms.
(Important points on constructing a system (6))