Specifications

ALAXALA Ring Configuration Guide (Edition 1)
Copyright © 2008, ALAXALA Networks Corporation. All rights reserved.
35
Logical configuration in building B
Figure 3.2-4 Network configuration diagram (Building B)
In building B, two AX6300S series switches are used as core switches (devices BC1 and BC2). These core
switches are connected to AX2400S series switches (devices BF1 and BF2) installed on each floor by using the
Ring Protocol (RING12). Devices BC1 and BC2 are also used to form a ring for the inter-building network
(RING10).
In building B configuration, devices BC1 and BC2 serve as shared nodes, and a multi-ring with RING10 and
RING12 is configured.
Of these rings, RING10 is configured as a shared link monitoring ring (O-shaped ring).
Purpose VLAN ID
RING10 ring control 10
RING12 ring control 12
Data communication 50-99
BC2: AX6300S
2/1
1/1
BC1: AX6300S
2/1
VLAN10,
12, 50-99
1/1
BF2: AX2400S
0/1
VLAN12, 50-99
0/3
0/23
VLAN50-99
BF1: AX2400S
0/1
VLAN12, 50-99
0/3
0/23
VLAN50-99
A
ccess SW
(L2SW)
V
LAN 50-99
block
RING12
Building B
Terminals
on floor 2
1/2
1/2
RING10
A
ccess SW
(L2SW)
Building B
Terminals
on floor 1
10GBASE-R
To AC1 1/2
in the
building A
To AC2 1/1
in the
building A
1000BASE-T
10, 12
Shared
link
Building
RING12
Master
VLAN12,
50-99
VLAN10,
12, 50-99
VLAN12,
50-99
NIF1: NH10G-8RX
NIF2: NH1G-24T
NIF1: NH10G-8RX
NIF2: NH1G-24T