Product manual

AX Series Network Partition: Solution Guide [Basic] Second Edition
© 2009-2010 ALAXALA Networks Corporation. All rights reserved.
40
Appendix: Configuration Files
Examples of the configurations introduced in this guide are described below.
Configurations for each device in each network configuration in Chapter 3 are attached to these files as text files.
(Adobe Acrobat 5.0 and later or Adobe Reader 6.0 and later are required to extract the attached files.)
For details on each configuration, see the attached files with the same names as the file names below.
3. Examples of Implementing Sys
tems with Network Partitions
3.1. Network partitions in an FT network
Device name and target
device
Target file
L3 core switch
#1
C1 (AX6708S)
3-1_FTN-NP_C1.txt
L2 access switch S1 (AX2430S-24)
3-1_FTN-NP_S1.txt
A1 (AX2430S-24)
3-1_FTN-NP_A1.txt
A2 (AX2430S-24)
3-1_FTN-NP_A2.txt
A3 (AX2430S-24)
3-1_FTN-NP_A3.txt
(*1) BSU mounts the BSU-LA.
3.2. Network partitions in a ring network
Device name and target
device
Target file
L3 core switch C1 (AX6304S)
3-2_RING-NP_C1.txt
L2 access switch S1 (AX2430S-24)
3-2_RING-NP_S1.txt
A1 (AX2430S-24)
3-2_RING-NP_A1.txt
A2 (AX2430S-24)
3-2_RING-NP_A2.txt
A3 (AX2430S-24)
3-2_RING-NP_A3.txt
3.3. Network partition using GSRP
Device name and target
device
Target file
L3 core switch C1 (AX6604S)
3-3_GSRP-NP_C1.txt
C2 (AX6604S)
3-3_GSRP-NP_C2.txt
L2 access switch S1 (AX2430S-24)
3-3_GSRP-NP_S1.txt
A1 (AX2430S-24)
3-3_GSRP-NP_A1.txt
A2 (AX2430S-24)
3-3_GSRP-NP_A2.txt
A3 (AX2430S-24)
3-3_GSRP-NP_A3.txt
3.4. Configuration method for shared networks
Device name and target
device
Target file
L3 core switch
#1
C1 (AX6708S)
3-4_FTN-NP-EX_C1.txt
L2 access switch
#2
S1 (AX2430S-24)
(
3-1_FTN-NP_S1.txt)
A1 (AX2430S-24)
(
3-1_FTN-NP_A1.txt)
A2 (AX2430S-24)
(
3-1_FTN-NP_A2.txt)
A3 (AX2430S-24)
(
3-1_FTN-NP_A3.txt)
#1 BSU mounts the BSU-LA.
#2 The access switch configuration is the same as for the switch in section 3.1, described above.