Product manual

AX Series Network Partition: Solution Guide [Basic] Second Edition
© 2009-2010 ALAXALA Networks Corporation. All rights reserved.
16
The logical configuration of the system is illustrated below:
Figure 3.1-2 Logical configuration
Node C1 (core), with an AX6708S series switch configured as an FT switch, uses VRF to handle two
independent networks, VRF10 for Network 1 and VRF20 for Network 2. Network 1 uses OSPF, and Network 2
uses RIP to inform its routes. System administration is maintained through the global network, enabling remote
control of the overall system.
Access edge nodes, using AX2430S series L2 switches, connect with core node C1 via channel groups (link
aggregation).
The important points and an example of the configuration for the devices are given below.
VRF10
terminals
A1
: AX2430S
VLAN100-101
0/1-2
0/5-12
VLAN100
0/13-24
VLAN101
A3
: AX2430S
VLAN200-201
0/1-2
0/5-12
VLAN200
0/13-24
VLAN201
A2
: AX2430S
VLAN100 ,200
0/1-2
0/5-12
VLAN100
0/13-24
VLAN200
C1: AX6708S
1/1, 2/1
VLAN100-101
VLAN10, 20
3/1, 4/1
VRF10: VLAN10, 100-101 VRF20: VLAN20, 200-201
VLAN100, 200
3/2, 4/2
VLAN200-201
3/3, 4/3
S1
: AX2430S
VLAN10,20
0/1-2
0/5-12
VLAN10
0/13-24
VLAN20
VRF20
terminals
VRF10
server
VRF20
server
LAG1
LAG11
LAG12
LAG13
Partition 1 =
VRF10: Network 1
Partition 2 =
VRF20: Network 2
2/24
System admin terminal
192.168.255.10
VLAN2
Global network =
system admin
Network 1: VRF10
Server: VLAN10
172.16.0.0/16
Terminal 1: VLAN100
192.168.10.0/24
Terminal 2: VLAN101
192.168.11.0/24
Network 2: VRF20
Server: VLAN20
172.17.0.0/16
Terminal 1: VLAN200
192.168.20.0/24
Terminal 2: VLAN201
192.168.21.0/24
Administration: global network
Admin terminal: VLAN2
192.168.255.0/24
VRF10 admin
terminal
(syslog collector)
172.16.255.10
VRF20 admin
terminal
(syslog collector)
172.17.255.10