Product manual

AX Series Network Partition: Solution Guide [Basic] Second Edition
© 2009-2010 ALAXALA Networks Corporation. All rights reserved.
12
AX6700S AX6600S AX6300S
Item BSU-LA BSU-LB CSU-1B
#1
MSU-1B
#1
Multicast-enabled VRF instances 127 per device 249 per device
#1 Support for VRF in the AX6600S series is active only when CSU-1B or CSU-1B1 is incorporated. Support for
VRF in the AX6300S is active only when MSU-1B or MSU-1B1 is incorporated.
#2 When a rendezvous point is set without specifying a group, the default group is assigned.
When setting rendezvous points in the global network and VRF instances, you must meet the requirements for the
total group count in a device or network (VPN), with the default group counted as one.
#3 This indicates the total number in the global network and the networks connecting to all the VRF instances in a
device.
(31) IPv6 multicast
When using IPv6 multicasts for multiple VRF instances, the sum of the global network and all VRF instances
should not exceed the values specified by the accommodating conditions below.
Table 2.1-2 Maximum number of IPv6 multicasts
AX6700S AX6600S AX6300S
Item BSU-LA BSU-LB CSU-1B
#1
MSU-1B
#1
PIM-SM/SSM multicast interfaces 127 per device 255 per device
MLD-enabled interface 127 per device 255 per device
Communication sources per group 256 per group
PIM-SM/SSM multicast channel information
entries ((S,G) entries, (*,G) entries, and negative
caches; S = sender IP address, G = group
address)
1,000 per device 8,000 per device
Settings (pairs of source and group) of the
coordination of PIM-SSM in MLDv1/MLDv2
(EXCLUDE mode)
256 per device
Records processed per report in MLDv2 32 records per message
32 sources per record
MLD groups 256 per device
Neighboring multicast routers 256 per device
Rendezvous points 2 per group
Groups available as rendezvous points per
device
#2
128 per device
Total groups assigned to a rendezvous point per
network (VPN)
128 per network (VPN)
256 per device
#3
BSR candidates per network (VPN) 16 per network (VPN)
256 per device
#3
Static groups 2,000 per device 4,000 per device
Static rendezvous point (RP) router addresses 16 per device
Sources per MLD group 256 per group
Settings to handle remote multicast server
addresses as directly connected servers
256 per device
16 per interface
Total number of downstream interfaces in the
multicast relay entries
140,000 per device 280,000 per device
Multicast-enabled VRF instances 127 per device 249 per device
#1 Support for VRF in the AX6600S series is active only when CSU-1B or CSU-1B1 is incorporated. Support for
VRF in the AX6300S series is active only when MSU-1B or MSU-1B1 is incorporated.
#2 When a rendezvous point is set without specifying a group, the default group is assigned.
When setting rendezvous points in the global network and VRF instances, you must meet the requirements for the
total group count in a device or network (VPN), with the default group counted as one.
#3 This indicates the total number in the global network and the networks connecting to all the VRF instances in a
device.